| Age | Commit message (Collapse) | Author |
|---|
|
* theme_bootswatch, theme_default, website_theme_install
|
|
Follow up of commit a3845ae3f058772d4b548c703f5ddf94b571d903
Issue
=====
Since the above commit there is a confirmation dialog when clicking on a button,
for which the only options are to Discard or Cancel.
The problem is that when discarding it will revert the selected website back to
the default value. Therefore before the current commit it is impossible to
install a theme on a website other than the first.
Solution
========
The solution is to avoid showing this dialog when clicking on buttons for which
the result depends on the currently selected website. This leads to the same
behavior as what existed before the mentioned commit: the settings are
implicitly discarded because they are not saved, but at the time of the click
the transient model still holds the non-discarded value that the user selected.
This restores the "select a theme" feature, but also restores the unfortunate
side effect that the user might unknowingly loose all of his pending changes
when clicking on the button, but only for those two specific buttons.
Other considerations
====================
Saving instead of Discarding was considered but it is impossible to do because
saving might do a lot of changes that might even lead to the installation of
modules, so the settings page has to be reloaded to apply them, and then the
website field will be reset to its default value again.
Instead of changing website specific settings from the main settings, it was
considered to update them through a form view, but it is apparently too
complicated for on-boarding.
The last consideration was that the settings view should actually mark the
corresponding fields as unchanged when changing the website, but it is too
complex to implement for a case that is not supported in the first place,
especially for a fix in a stable version.
task-2083198
closes odoo/odoo#38745
X-original-commit: 2298ef19bcd9e7a14958dce9a93cea69258064d8
Signed-off-by: Sébastien Theys (seb) <seb@odoo.com>
|
|
task-1907934
closes odoo/odoo#31114
|
|
From now, when you install a theme, it load the data from xml to template
table theme [ir.ui.view|ir.attachment|website.page|website.menu].
Data are only copied from this template table into the real table when you
choose a theme on a website; Making them website_specific and with a link
to the original to allow futur update.
A special case is done to create theme.ir.ui.view when you are installing
a theme, even if you continue to use template tag to create quick view.
Co-authored-by: Derie Romain <rde@odoo.com>
Co-authored-by: Kersten Jérémy <jke@odoo.com>
|
|
- Uniform colors and design
- Replace duplicated icons (eg. sale / sale_management)
- Improve misleading icons (eg. POS)
- Add icons for new apps
Add SVG versions to lossless future editing and print/marketing use.
task-54681
|
|
Odoo used to declare two main colors: primary and optional (which are
purple and turquoise in enterprise). Those were respectively assigned
to the 'primary' bootstrap variable and the 'btn-primary' bootstrap
variable.
BS4, however, does not allow to have a different primary color for
buttons. Instead, the 'primary' color is used for all 'primary' related
components and utility classes, same as for all other colors. So, if we
want to keep our enterprise buttons green, our 'optional' colors had to
become our 'primary' color. The old odoo primary is then renamed to the
'odoo' color.
The palette of grays is now larger by default and is numbered from 100 to
900 alongside the $black and $white variables. The equivalence for older
variables and the way we used them is:
$gray-darker -> gray 900 (unused before)
$gray-dark -> gray 900
$gray -> gray 700
$gray-light -> gray 600
$gray-lighter-darker -> gray 400 (the old variable was created by us)
$gray-lighter-dark -> gray 300 (the old variable was created by us)
$gray-lighter -> gray 200
Fortunately, the 'lighter' variations we created fit well in the default
BS4 system ! Unfortunately, our $gray-lighter which carried the same
function as $gray-200 (see above) is very close to the new default
$gray-100 and quite distant from the new $gray-200. This will be handled
in the next commit.
|
|
|
|
BS variables were renamed or changed and all (most) variables now
use 'rem' units instead of 'px' unit.
|
|
- The dropdown structure was simplified, allowing to get rid of the
3-levels structure induced by <ul/> elements and dropdowns can now
contain anything. The class 'dropdown-item' is now mandatory for
each dropdown clickable element. The class 'dropdown-item-text' can
be used to add same padding and style but without making the element
have a clickable look.
- Dividers now use the class 'dropdown-divider'
- The way dropdowns are opened and hidden also changed (before the
'open' class was added on the `.dropdown-menu` parent, now the
'show' class is added on both the `.dropdown-menu` parent and the
`.dropdown-menu` itself).
- JS-wise, no click event handlers can be put on `.dropdown-toggle`
elements anymore (instead, use handlers for dropdown events).
- Carets are automatically put on `.dropdown-toggle` elements, so this
commit replaces the `.caret` elements with this. This feature was
possible to disable but would prevent us from adding a caret with
scss. Also, this simplifies the DOM. The 'o-no-caret' class was also
introduced to allow using the 'dropdown-toggle' class on non-caret
elements.
- Also adapt the scss to use $caret-width instead of $caret-width-base
|
|
|
|
media queries that target a specific screen size handled by bootstrap
have now a more convenient way to be defined:
```
@media (min-width: $screen-sm-min) { ... }
->
@include media-breakpoint-up(sm) { ... }
```
```
@media (max-width: $screen-sm-max) { ... }
->
@include media-breakpoint-down(sm) { ... }
```
```
@media (min-width: $screen-sm-min) and (max-width: $screen-sm-max) { ... }
->
@include media-breakpoint-only(sm) { ... }
```
```
@media (min-width: $screen-sm-min) and (max-width: $screen-md-max) { ... }
->
@include media-breakpoint-between(sm, md) { ... }
```
Also, bootstrap has changed the values for its default screen sizes:
------------------
| BS3 | BS4 |
------------------
0 | XS | XS | -> Portrait Mobile
576 | / | SM | -> Landscape Mobile
768 | SM | MD | -> Portrait Tablet
992 | MD | LG | -> Landscape Tablet / Small Desktop
1200 | LG | XL | -> Desktop
------------------
While it is possible to configure BS variables to behave as BS3, we took
the decision to keep the BS4 variables untouched. BS4 system seems
indeed better and having the purest bootstrap possible is better for
Odoo to be used as a framework.
|
|
BS4 do not provide vendor prefixes scss mixins anymore as it is meant
to be used with the 'autoprefixer' library. As we only support the last
version of every major browsers in Odoo, we took the decision to not
use the library as it was also complex to integrate in Odoo. We decided
to do the library's work by hand if it ever become necessary.
|
|
Unlike LESS, SCSS variables are not lazy loaded. Our system has thus
to be updated. This commit creates new templates which are t-called
in assets bundles (to replace the old less_helpers template):
- web._assets_utils: regroups the mixins and functions which *can*
(and so should) be available in every asset bundle
- web._assets_primary_variables: regroups the variables (or mixins
used as variables) which *can* (and so should) be available in
every asset bundle
- web._assets_secondary_variables: same as above but provides an
environnement where all the 'primary' ones are accessible. This is
for example useful to handle the community/enterprise split:
// Community primary variables
$o-pink-color: pink; // enterprise color
$o-brand-primary: blue;
// Enterprise primary variables
$o-brand-primary: $o-pink-color;
// Community secondary variables
$o-my-darker-primary: darken($o-brand-primary, 5%);
=> If there was only one variable template, enterprise edition would
have been able to define its primary color at the end but the
darker primary would not have been updated. Using the "!default"
system and putting enterprise definition above would not have
solved the problem as the $o-pink-color would not have been
accessible.
- web._assets_backend_helpers: regroups the variables, mixins and
functions which *can* (and so should) be available in the backend
asset bundle only. This is especially (only?) useful for bootstrap
variables overriddes.
- web._assets_frontend_helpers: regroups the variables, mixins and
functions which *can* (and so should) be available in the frontend
asset bundle only. This is especially (only?) useful for bootstrap
variables overriddes.
Note: bootstrap variables are not accessible in any of those anymore.
If you have variables that should depend on bootstrap, you have 3
solutions:
- Find another way: your variable is probably useless, use bootstrap
variables directly or create a variable that will influence the
value of bootstrap variables. E.g. instead of declaring:
`$myvar: $bootstrapvar * 3`
and using $myvar alone, declare:
`$myvar: 3` and use `$myvar * $bootstrapvar` where needed.
- Declare a copy of the bootstrap variable and use that one. In that
case, you should also force-set the real bootstrap one to be sure
they match (this should be done in appropriate templates mentioned
above). E.g.
```
$o-boostrapvar: 5;
...
$boostrapvar: $o-bootstrapvar;
```
- Set your variable to null and set it to your bootstrap expression
in the file you will need it (where bootstrap variables are accessible)
without forgetting to add the !default flag to allow overriddes.
```
$myvar: null;
...
$myvar: $bootstrapvar * 5 !default;
```
This commit also partly changes the variable names to follow the
convention:
$o-<app_id>-<name> where 'app_id' is the current's app name or a
meaningful unique identifier ("theme" for all themes for example, as
no multiple themes can be installed).
|
|
Convert content so that the assets compile on app installation. The
style is still broken after this as the variables/mixins/... are not
defined in the right order (as it did not matter in LESS but does in
SCSS).
This commit basically changes:
- Variables: @var_hello -> $var-hello
- Mixins: .mixin_world() {} -> @mixin mixin-world {}
- Classes used as mixin: .my_class() -> @extend .my_class
- Here there were no other solution than to convert the use of
a mixin call by the use of an extend as a first approximation
- LESS functions -> SCSS functions (e.g. fade -> rgba)
- Move first variable definition before the variable is used
- Still need to make sure last variable definition is at the
right place
|
|
This is a simple renaming without adaptation.
|
|
- Useless horizontal scrollbar
- Misalignments
- Broken mobile layout
|
|
Following commit 828c7c3da92970e3f0836a62f858ac2f5229947a:
the kanban record animation when a theme is hovered was blurry with
chrome and laggy with firefox (with linux at least). This commit
removes the scale part of the animation which was the cause of this.
|
|
- Handle vertical screenshots
- If a theme is installed, show it first, hide buttons and use a
specific design
- If no screenshot has been defined, show the cover (or the icon if no
covers has been defined neither)
- Show theme's name and category
- Allow to filter by category
- Design grouped layout
|
|
|
|
New module to propose theme installation on website installation.
|
