| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
In the reference widget, the focus was always on the input (many2one) even
though the first select (with the model) was not set.
Thanks to @kaerdsar for the original PR.
Partially closes #24070
|
|
|
|
|
|
Consider the following scenario involving a one2many list (non
editable) inside a form view:
- click on 'Add an item', a model opens,
- fill the fields and click on 'Save & Close',
- reopen the freshly created record,
- maybe make some changes (this is optional, but makes sense),
- click on 'Save & New',
- fill the fields and click on 'Save & Close',
-> the second created record isn't added to the list.
The problem comes from the fact that when the dialog is opened for
the second time (in this case by clicking on a record), the 'save'
handler registers an 'UPDATE' command. While this is correct for
the 'Save & New' click (as we update an existing record), this
isn't for the second record which doesn't exist yet, and thus
requires an 'ADD' command.
This rev. ensures that the two cases are handled in the 'save'
handler given to the dialog.
OPW 1829723
|
|
The goal of this commit is to allow fast entry of the same model using
the keyboard for navigating through the form once, by blocking the user
from advancing in the form if there is a required field or once they
went through the form once to get them to a primary action (button)
This commit includes the following changes
1) Enable moving forward from field to field using the TAB key
2) Entering the one to many and many to many using the TAB key
a. When entering it, set the focus on the "add new line" link or
button
b. When adding a new line, set the focus on the field visible
editable field of the new line
c. Discard adding a new line with ESC key
d. If the user leaves the first field empty and uses TAB, we
will cancel the adding of a new line and move to the next
field of the form
3) When a field is required and not filled in, do not allow the user
to move out of the field using the TAB key (the user is still
allowed to use the mouse though), mark the field as invalid
instead
4) After going though the form once, using the TAB key on the last
field will move the focus to the first primary button of the page
5) When the focus is on a primary button (EDIT/SAVE), the user cannot
move the focus forward using the TAB key. Hitting TAB again will
display a tooltip telling to hit ENTER to activate the button.
The mouse is still available to move the focus.
6) When the user saves, the focus is placed on the first primary
button of the form renderer (like VALIDATE for a new invoice)
7) On dialogs, primary buttons should stop the users from moving out
of them, and showing a popup if the user tries
8) When closing a dialog, the focus will be moved back to the widget
that opened it.
This commit does not include the following features
1) Navigation with the keyboard on a selection one to man
2) Navigate between tabs in a form using the keyboard
3) Cancelling the adding of a new line in a many to many using the
ESC key do not set the focus correctly
4) Enhancing the focusses fields (like blue underline)
|
|
|
|
Before this commit, when some records were created from an `onchange`,
we have the following weird behaviour:
Suppose that this record has some required fields that are empty.
When we click on this record, then somewhere else, the record
disappears from the list.
This is because the records contains invalid fields, and it is wrongfully
assuming that the record to be discarded comes from "Add an item".
A previous commit [1] fixed a bit this issue with `default_get`, but since
it relied on a fragile heuristic, we decide to apply the correct fix with
this commit.
[1] https://github.com/odoo/odoo/commit/b09f0c99be2b13d33986414485556d87da186d65
|
|
For x2many relational fields(of type kanban), we shoud be able to set custom label for
'Create / Add' button by adding 'create_text' node option on particual field from xml.
Right now, 'create_text' is only handled for many2many fields, preventing users to set
custom label for one2many fields.
This commit allows users to set Create Button label for both m2m and o2m fields.
|
|
|
|
|
|
The issue here is quite simple. If we are editing a multipage one2many
field, then we click on the pager, we need to properly unselect the
current row.
If we do not do that, then we can enter invalid data. For example,
assume that there is a readonly field. We click on add, it creates a
(virtual) record with no value for that field. When we click on the
pager, we select the next page, and bypass all validation.
|
|
When we are in the process of adding a record, we do not want to update
the pager count. The reason is that if the user is at the limit (so,
1-40/40, no pager visible), then click on add, there will be a pager
shown with 1-40/41. Now, imagine that the record currently being added
as a required field, and the user clicks on the pager. In that case, we
need to discard the newly added record (bringing the total back to 40),
then move to next page, which does not exist anymore.
So, to fix this issue, we simply consider that a record being added
does not count, from the point of view of the pager.
|
|
The widget statusbar was using an attribute `clickable` on the field widget
to define if the statusbar was clickable.
This attribute is in fact not a field attribute but a widget option so it
has been moved accordingly.
Note that a retro-compatibility adapation is done in the field widget.
|
|
|
|
some objects-
)
|
|
|
|
In some cases, the footer in a form view dialog could be duplicated.
The reason was that the form view was rerendered completely, footer
included, by the renderer, out of the formcontroller control (it is the
formcontroller's job to move the footer buttons to the footer).
A possible fix is to work on the form renderer to make it aware that the footer
buttons are expected to be only rendered once, but it has the disadvantage to
be a fix specific to this issue, and any other form view behaviour with some
side effects may have the same issue.
This commit tries to prevent the form view from rerendering itself
completely in those cases. This also has the disadvantage of possibly
not being a complete fix, if some edge cases are missed. However, I
have the feeling that we still want to avoid rerendering the full view
if possible.
|
|
|
|
|
|
From a form view (say Bill of materials)
Edit the form
Click on a bom line
Click on the external button that makes the product form pop up
change the order of suppliers on that product
Before this commit, a JS traceback was raised
This was because the changing object was not present in the localData that the Model object holds
or more accurately, it was not the **right** model object that was targetted
and this was due to the propagation of the resequence event
After this commit, no error is thrown, and the resequencing works as expected
OPW 807196
|
|
|
|
|
|
Two attempts of dealing with sorting (and resequencing) in tabbed (multi-pages)
x2many editable lists (see odoo/odoo@c2563db and odoo/odoo@983c7ae) have been
previously done, using a static attribute (`keepChangesUnsorted`) on the
datapoint.
This solution sadly only covers both cases separately, not if they are combined.
Morever, onchanges were not correctly managed in neither of these two cases.
A new approach is used here, by "freezing" and "unfreezing" the datapoint when
needed, which is more flexible.
Some modifications have been introduced:
- when ordering a x2many, all records are now considered (and not only the
records on the current page) ; an additional read is thus done on the sorted
field for all records in the x2many relation
- `setSort` is now asynchronous as a `read` might be needed
|
|
|
|
|
|
In many2many lists, the remove record from the widget is a trash bin.
It is confusing, as people feel they are deleting it when they are
only unlinking it.
So in many2many, we propose to change the trash icon by a 'X'.
This icon appears in many2many relations and in many2many widgets:
even though hr.expense.sheet defines the expense lines as a one2many,
it uses a many2many widget, so we use a 'X' instead of the trash bin.
To avoid ambiguity, we decided to rename 'delete' to 'remove'.
|
|
[FIX] web: Fix column_invisible issue
This commit fixes an issue with the column_invisible attribute.
When we choose product variant for BOM for any particular product,
at that time from the BOM Lines column "Apply on Variants" is hidden,
but when we unset product variant from BOM Form,
at that time the column 'Variants" set to visible. but in this case, it is set to hidden always.
PR 21693, OPW 779555
|
|
[FIX] web: Fix column_invisible issue
This commit fixes an issue with the column_invisible attribute.
When we choose product variant for BOM for any particular product,
at that time from the BOM Lines column "Apply on Variants" is hidden,
but when we unset product variant from BOM Form,
at that time the column 'Variants" set to visible. but in this case, it is set to hidden always.
PR 21693, OPW 779555
|
|
When modifying files the a widget FieldMany2ManyBinaryMultiFiles would
not keep its metadata (currently associating attachment to [url,
allowUnlink]) up with current value.
So with an attachment added after init:
- clicking on it would error (because link is wrong)
- deleting it would unlink attachment originating from from onchange
The expected behavior is:
- being able to download attachments
- not unlinking attachment originating from onchange
and this is what this commit fixes.
opw-787746
closes #21813
|
|
Before this commit, the way mode was handled was not optimal. The end
result was correct (the widget were properly created/displayed in
edit/readonly as required), but useless work was done. In particular,
if we have list/x2manys with widgets and modifiers, it could happen that
widgets were created in edit mode, then destroyed and recreated in
readonly mode.
This could happen in some important views, for example, any view with a
field many2many_tags with a readonly modifiers (pretty much all views
handling taxes)
In this commit, we add a 'editable' attribute to list renderer. This is
necessary, because the list renderer is not actually editable when it is
in a x2many in a form view which is in readonly mode. Also, we need to
manage the distinction between the fact that a list view is editable,
and the fact that some widgets are created in edit and other in readonly
mode, depending on modifiers, and on which line is being edited.
We also add a benchmark (courtesy of CHM) to be able to measure the
performance impact of edit/readonly/onchange in a larger form view.
Before this commit, running this form benchmark on my machine gave a
number of 0.4 op/sec, and after, it increases to 1.26 op/sec, so a
pretty large improvement.
|
|
|
|
|
|
The 'main_flow_tour' noticed an error that we
had already corrected for the input fields.
See here: @a71f2237
In fact the same error can occur in the many2one fields
for the exact same reason.
It's why the 'main_flow_tour' crashed at the following step:
".ui-menu-item > a:contains('the_flow.customer')"
|
|
New feature:
- New Transparent tag visual (grey border & text, white bg),
- By default, newly created kanban tags are transparent,
- Tag's colorpicker has now a 'Hide in Kanban' checkbox,
to select the transparent color.
Toggling off 'Hide in Kanban' sets the color of the tag as follow:
- Previous color, if 'Hide in Kanban' was toggled on on the
same formview session.
- Color 1 (dark orange), otherwise.
|
|
|
|
Consider this: a form view with a one2many list view. In the one2many
list view, there is a many2one field. When opening the manyone in a
modal form view, there is a many2many field. In that situation,
clicking on 'Add a new record' on the many2many field had the
unfortunate effect of interfering with the one2many field in the main
form view, which caused a crash or the modal form view to close
unexpectedly.
The issue is that an event was simply not properly stopped at the proper
location. This is usually not a big deal, but, as described above, it can be
a problem in some cases.
|
|
|
|
Here is a scenario that could cause an issue:
- open a form view with a many2one
- click on edit button
- click on small external button for many2one. this opens a modal form
view
- click on save in the modal (without changing anything)
- click on save in the main record
- exit form view. this opens a discard dialog
There were two issues here:
- saving the modal dialog automatically marks the many2one field as changed.
This was necessary to force reloading the data, because editing a sub value
in the modal form view could have changed the display_name of the manyone
field. However, this is not necessary when no change was done.
- when saving a record, the _isDirty flag was reset to false only if an
actual rpc was done. However, it may happen that the flag is set to
dirty (for example, when modifying a value inside a many2one), but the
main record has no changed fields.
In this commit, we also remove the on_save handler in the
formviewdialog. This is a small refactoring in a stable version, but no code
currently use it, and I believe that it will make the code much easier
to maintain (the previous code was really awkward), so I think that the
tradeoff is acceptable.
|
|
|
|
After entering a value in a many2one, if one clicks somewhere else, a popup
is opened to suggest the user to create (or not) a new record with the entered
value.
Before this rev, closing this popup resulted in an unclear situation where the
input was still set with the entered value but the new record hadn't been created.
This commit fixes this by clearing the input value if the record is not created.
See task#36055
|
|
|
|
Before this commit, many2one fields were not (fully) usable in a list view: if
the user wrote some text, then when a dropdown with various choices
opened, pressed the 'down' key (to select a choice), the down keypress
caused a navigation move to the next line, which cancelled the
selection.
In this commit, we make the assumption that if the many2one dropdown is
opened, then navigation moves are not what the user wants.
|
|
|
|
issue: When reorder each line trigger an onchange on the line (if they are an
onchange linked to the field) and one onchange per line on the parent.
Adding an option doNotNotifyChange to avoid the trigger on the parent.
|
|
|
|
When displaying a many2one values, in edit mode, the option did not
properly display some characters.
|
|
Before this commit, m2o external button was always floating outside the
m2o main DOM element, on the right. This induced problems when using the
m2o outside of views (like in Odoo Studio). Now, the m2o design is made
so that this button is inside the m2o, except in form views where we
expect the button to overflow in the tables' right paddings.
|
|
|
