| Age | Commit message (Collapse) | Author |
|---|
|
Go to CRM/Sales/Team Pileline. Place your cursor on the chart, a tooltip
appears, move your cusror away, the tooltip disappear. Now clic anywhere
on the interface so the page change (i.e. on "x Open Opportunities") and
quickly while the page loads place your cursor on the tooltip, it
appears but when the page change it doesn't disappear.
The problem here is that the graph element is removed from the DOM which
prevent the correct handling of the `mousehover` event used internally
by nv.d3 to show/hide the related tooltip.
The solution is to manually hide the tooltip when the graph element is
removed from the DOM.
opw-2042286
closes odoo/odoo#35172
Signed-off-by: Lucas Perais (lpe) <lpe@odoo.com>
|
|
|
|
|
|
|
|
|
|
When uploading a file to a binary file, then clicking on the
"clear" button, then reuploading the same file...
Before this commit:
The actual input of the field was only changed on user input.
This means that the "clear" action didn't reset the actual value
of the input, and the browser's default behaviour when getting
the same path twice is not to change anything. In the use case,
you couldn't upload the same file until you uploaded another one.
After this commit:
The "clear" action now also clears the value, allowing reuploading
the same file over again.
closes odoo/odoo#33843
Signed-off-by: VincentSchippefilt <VincentSchippefilt@users.noreply.github.com>
|
|
|
|
|
|
Since f4fbaf1efa the structure of checkboxes has been improved, now we
have something like:
```
<input type="checkbox" id="checkbox-18" class="custom-control-input">
<label for="checkbox-18" class="custom-control-label">​</label>
```
With the first input invisible (whilst before it was visible and the
clickable element).
This cause an issue in an editable list view:
- we have a boolean readonly field in a cell
- we are on focused on a line (not in the boolean field cell)
- we click on the boolean field
=> the check mark is toggled
This is because when we switch cell, we try to activate the widget of
the other cell. Before f4fbaf1efa this issue did not happen since the
browser do not generate a click event when clicking a disabled checkbox.
With this changeset, a disabled FieldBoolean is not focusable as is the
case for other fields, so we can't "activate" it.
Without the fix, the added test fails with:
[clicking disabled checkbox did not work]
opw-1958433
closes #32652
Signed-off-by: Aaron Bohy (aab) <aab@odoo.com>
|
|
Have a timesheet uom per Day
Have a language with a different number format than English
Click on grid cell to change its value
Before this commit, the value was stuck on the highest value in range
This was because the parsing of the value into float was not taking into account
the real format of the float
After this commit, it works in all languages
OPW 1964657
closes odoo/odoo#32581
Signed-off-by: Lucas Perais (lpe) <lpe@odoo.com>
|
|
The widget has been moved in rev. odoo/odoo@15f3bbe but was not very generic.
In particular, there was a traceback when clicking on the button if the field
had no value (the button was displayed for readonly fields in create mode).
The button is now only appended in readonly mode (a `button` inside an `input`
or a `textarea` is not very DOM friendly) if the field has a value.
Task 1941996
closes odoo/odoo#31635
Signed-off-by: Aaron Bohy (aab) <aab@odoo.com>
|
|
Have a form record with a progress bar
Modify the max_value of the progress, as well as the current_value bar through an onchange
Before this commit, the new max_value was not taken into account
After this commit, it is.
closes odoo/odoo#29056
|
|
closes odoo/odoo#30792
|
|
|
|
|
|
|
|
If we click on a link, we only want to open the URL,
and not the record when the button is on a list.
PR: #27230
|
|
In a form view (account.invoice), have a date field as:
<field name="date" options="{\'datepicker\': {\'warn_future\': true}}"/>
Open a record with the field set to a value
Click Edit, click save
Click create
Before this commit, the value of the field of the new record
took the one of the previous record
On account invoices, it resulted on having the popup "The record has been modified etc...."
And it was not possible to create an invoice from another one
this was because we passed the same reference object for the datepicker
After this commit, there is no popup as the field do not take a value from the framework
OPW 1906085
closes odoo/odoo#28759
|
|
|
|
The handler function was used directly in the code. The MouseEvent wasn't provided in that case.
This FIX split the handler function and the processing function so that it doesn't interfere.
closes odoo/odoo#27929
|
|
|
|
The datetimepicker option was introduced to be able to customize the
datetime picker widget in date/datetime fields. However, due to the way
the _makeDatePicker function was coded, it did not work in datetime
fields.
Thank to Yajo for the initial fix
closes odoo/odoo#27541
|
|
Introduce official support for SVG files in the framework, including the
following parts:
1. When client-side SVG images are uploaded, the content is displayed until
you save using data URI scheme according RFC 2397 [1]. This scheme requires
to specify content format. Using hardcoded "image/png" works for all images
types except SVG.
Type-sniffing is done using "magic byte" detection via the first base64
encode byte, so that the proper data URI scheme can be used.
This should not cause SVG-related security problems as the file is
displayed through `<img>` tag, which does not allow SVG scripting [2].
2. Make /web/image controller compatible with SVG
3. Add support for SVG files for company logo, which uses a dedicated
controller.
4. Resizing of SVG files is a no-op, as it makes little sense for a
vector-based format. We also want to avoid micro-alterations to the SVG
document (in "natural" viewport parameters) as we would store multiple
copies of the files in the filestore.
5. Because SVG files are inherently dangerous, upload of SVG files is
restricted to administrators, either by blocking it directly before
saving it in the database (binary fields with attachment=False), or by
neutering them to text/plain mimetype (for binary fields with
attachment=True)
6. Add tests for the SVG upload cases and for the non-admin uploads.
[1] https://tools.ietf.org/html/rfc2397
[2] https://www.w3.org/wiki/SVG_Security
Closes #26635
|
|
Before this fix, in form view, when a datepicker was not visible (because
they were on another page or literally invisible), when the user pressed
TAB and the datepicker was positionned after the current field in the
form, it was capturing the focus during the activate phase of the
navigation_move.
This is not correct for invisible elements.
After this fix, only focusable datepickers get the focus during the
activation phase of the navigation_move.
co-author: aab-odoo (aab@odoo.com)
|
|
Before this change, when the focus was on the first field on a x2many
field, and the user pressed TAB, the line would be discarded and the
focus moved to the next field (at the level of the x2many) in the form.
This was an issue because if the first field was required, the focus
could not be moved out of the field with TAB so the user had to discard
the line manually (with ESC) before moving to the next field
This change works with 2 changes:
1. detecting if a line is dirty (has been modified by the user) and at
the end of the line, decide to either
- discard the line and move the next field, if the line is not dirty
- commit the line and add a new line, if the line is dirty
2. allow users to use TAB through required field inside x2many so they
can easilly go to the end of the line.
Task id : 1872248
|
|
|
|
|
|
|
|
The datepicker lib has been updated to tempus dominus (BS4)
recently, but our code hasn't been adapted correctly to the
requirements of the new version of the lib. As a consequence,
the datepicker didn't close itself when the input was focused
out anymore.
This required a slight change in the DomainSelector widget as it
produced a crash when a focused datepicker widget is removed from
the DOM (before the datepicker is destroyed), e.g. by a call to
html() on one of its parent.
Task 1878254
|
|
Hardening of commit:995610c065bf0242cb5023cfad2940234395739e
The JournalDashboardGraph requires nv, which is lazyloaded.
However it requires nvd3.js which is loaded after nv.d3.js.
A function called in destroy is defined by nv.d3.js,
which can make the crashhappen with the right (wrong) timing.
opw 1873749
|
|
|
|
This allow the browser/device to handle the experience of handling number in a more native way.
FieldInteger and FieldFloat now inherits from NumericField because we want
to format it or not dependent of the view (readonly or edit) and the
NumericField will manage it.
We do that because input type number can't take a value with comma on Chrome
(FireFox is more permissive but not perfect because comma is the separator
for decimal in this case).
Task #1880376
|
|
|
|
|
|
The domain was instantiated without being given any evaluation context.
As a result, the uid variable was not defined,
crashing the js if present in a user-defined filter.
opw 1866852
|
|
momentjs `isSame` method considers undefined values but not false
our method _isSameValue does consider false
Correct the error when running web tests
Deprecation warning: value provided is not in a recognized ISO format
|
|
289adeb63f51a9af26b8f383ba80089aa7aa6d87 introduced a bug where we tried to trigger an event on an element that didn't exist. Indeed there is no input if it's not in edit mode.
This commit fixes it.
PR: none
Task: none
|
|
Since in hr_timesheet, we are binding 'timesheet_uom' widget
on existing one (and it might change according to the session
info), we came to the case a formatType is different from the
one of the widget in the registry. Then, the AbstractField
fallbacks on the field type as formatter. Example;
timesheet_uom widget is blind on float_time, but their keys
are differents in field registry, so the formatter will be
'float' and not 'float_time'.
This commit override the formatType determined by the
AbstractField for the float_time widget.
|
|
Take advantage of the new BS4 checkbox structure to simplify the
widget too.
|
|
Before this commit, a textarea would not resize when its value changed if the event was different than "input" or "focus".
This commit fixes it by also listening to the "change" event, and by triggering it at appropriate times.
PR: #26430
Task: 1869469
|
|
In a one2many, pressing ENTER or TAB from a required input (of type text or char) that is on the last editable column of its line would fail to navigate to next line.
The issue was that the validation of the required field would happen before the change to its value was actually applied.
This commit fixes it.
PR: #26430
Task: 1869469
|
|
The lib 'nvd3' renders graph when they are attached to the
DOM. However, widgets are rendered in fragments and
appended to the DOM when ready (to prevent flickering).
Before this commit, we used a `setTimeout(0)` and cross
fingers that the widget was attached to the DOM when the
`render` method was called.
With this commit, the render method is called when it is
attached to the DOM.
Task-ID 1868252
Closes #26410
|
|
When paced inside the i tag, the text used to inherit from the
style of the star, which means the text was yellow when starred.
|
|
Before this rev. one could set the report layout on the company using a
hardcoded list (background, clean, standard, etc.). Other modules (typically
accounting modules) could add options in this list. The used template was built
on the layout key.
Now, the layout is a many2one field to a newly created model `report.layout`,
which is linked to a view with the layout architecture.
This gives more control to customize reports and create a new layout (without
creating a python module that extend the layout selection).
|
|
This commit provides new js widgets for list, kanban and form
views on float field.
1/ 'float_factor' displays the normal float field, but takes a
conversion factor as option. The displays value is the normal
one multiplied by the factor.
You can use the widget like
<field name="my_float_field" widget="float_factor"
option="{'factor': 2}"/>
2/ 'float_toggle' displays a button (in edit mode) looping on a
range of given value at each click. A conversion factor is optional
(default will be 1) to display a converted value, but sent to
non converted one to the server.
You can use the widget like
<field name="my_float" widget="float_toggle"
option="{'range': [0, 0.5, 1], 'factor': 2}"/>
'range' and 'factor' are put in the options.
In simple read mode, the widget display the value as a traditionnal
text (like a normal char field).
This commit provides tests and documentation for those 2 widgets.
Task #39079
|
|
Since Bootstrap 4, ClipboardJS does not copy the value in the clipboard anymore
as Bootstraps modals give the focus to another element. As the focus need to be
given back to the correct element, ClipboardJS has to be updated as the
container parameter is only added in v1.7. We were in 1.5.
That container parameter allow to give the focus back to the correct element.
See doc on https://clipboardjs.com/
+ Issue : https://github.com/zenorocha/clipboard.js/issues/155
|
|
|
|
|
|
Revision on https://github.com/odoo/odoo/commit/4b3588feb2b7e260bf237b0f3944c90cdc47c3b5
In order to not replace characters with '*' in edit mode (because of `input`
with type 'password'), the above commit did not format the value at all.
The formatter of a char with the option 'isPassword' turns all of its
characters into '*'. That is not intended for password inputs, because the
content is hidden by the browser with the 'password' type.
The issue with not using the formatter is that an empty field has the value
`false`, so an empty password field produces an non-empty password input with
its value to 'false'.
This commit fixes the issue by forcing empty string for empty password values.
Note: if you use an integer field with password, falsy values (e.g. `0`) become
empty strings in the input value.
|
|
Before this commit, when someone was editing a password, the stored
password may not be the expected one by the user.
Steps to reproduce:
1. Open "Outgoing Mail Servers" form.
2. Set a password (e.g. "yop").
3. Save, then edit.
4. Add "y" at the end of the password field.
> Expected value: "yopy"
> Actual value: "***y"
This is due to the use of the char field formatter, which displays passwords
by replacing the characters with '*'. It is not necessary to do this in edit
mode, because it uses an input field of type 'password'. The browser
automatically hides the value of such inputs.
Any changes on a input field in edit mode uses the value of the input, so the
value of an password input should contain the password, without '*'.
This commit fixes the issue by using the formatter in edit mode for the input
of type 'password'.
Task-ID 1869565
|
