1 files changed, 185 insertions, 0 deletions
diff --git a/bin/reportlab/graphics/barcode/test.py b/bin/reportlab/graphics/barcode/test.py
new file mode 100644
index 00000000000..3342947672e
--- /dev/null
+++ b/bin/reportlab/graphics/barcode/test.py
@@ -0,0 +1,185 @@
+#!/usr/pkg/bin/python
+
+import os, sys, time
+
+from reportlab.graphics.barcode.common import *
+from reportlab.graphics.barcode.code39 import *
+from reportlab.graphics.barcode.code93 import *
+from reportlab.graphics.barcode.code128 import *
+from reportlab.graphics.barcode.usps import *
+
+
+from reportlab.test import unittest
+from reportlab.test.utils import makeSuiteForClasses, outputfile, printLocation
+from reportlab.platypus import Spacer, SimpleDocTemplate, Table, TableStyle, Preformatted, PageBreak
+from reportlab.lib.units import inch, cm
+from reportlab.lib import colors
+
+from reportlab.pdfgen.canvas import Canvas
+from reportlab.lib.styles import getSampleStyleSheet
+from reportlab.platypus.paragraph import Paragraph
+from reportlab.platypus.frames import Frame
+from reportlab.platypus.flowables import XBox, KeepTogether
+from reportlab.graphics.shapes import Drawing
+
+from reportlab.graphics.barcode import getCodes, getCodeNames, createBarcodeDrawing
+def run():
+    styles = getSampleStyleSheet()
+    styleN = styles['Normal']
+    styleH = styles['Heading1']
+    story = []
+
+    #for codeNames in code
+    story.append(Paragraph('I2of5', styleN))
+    story.append(I2of5(1234, barWidth = inch*0.02, checksum=0))
+    story.append(Paragraph('MSI', styleN))
+    story.append(MSI(1234))
+    story.append(Paragraph('Codabar', styleN))
+    story.append(Codabar("A012345B", barWidth = inch*0.02))
+    story.append(Paragraph('Code 11', styleN))
+    story.append(Code11("01234545634563"))
+    story.append(Paragraph('Code 39', styleN))
+    story.append(Standard39("A012345B%R"))
+    story.append(Paragraph('Extended Code 39', styleN))
+    story.append(Extended39("A012345B}"))
+    story.append(Paragraph('Code93', styleN))
+    story.append(Standard93("CODE 93"))
+    story.append(Paragraph('Extended Code93', styleN))
+    story.append(Extended93("L@@K! Code 93 :-)")) #, barWidth=0.005 * inch))
+    story.append(Paragraph('Code 128', styleN))
+    c=Code128("AB-12345678") #, barWidth=0.005 * inch)
+    #print 'WIDTH =', (c.width / inch), 'barWidth =', (c.barWidth / inch)
+    #print 'LQ =', (c.lquiet / inch), 'RQ =', (c.rquiet / inch)
+    story.append(c)
+    story.append(Paragraph('USPS FIM', styleN))
+    story.append(FIM("A"))
+    story.append(Paragraph('USPS POSTNET', styleN))
+    story.append(POSTNET('78247-1043'))
+
+    from reportlab.graphics.barcode import createBarcodeDrawing
+    story.append(Paragraph('EAN13', styleN))
+    bcd = createBarcodeDrawing('EAN13', value='123456789012')
+    story.append(bcd)
+    story.append(Paragraph('EAN8', styleN))
+    bcd = createBarcodeDrawing('EAN8', value='1234567')
+    story.append(bcd)
+
+    story.append(Paragraph('Label Size', styleN))
+    story.append(XBox((2.0 + 5.0/8.0)*inch, 1 * inch, '1x2-5/8"'))
+    story.append(Paragraph('Label Size', styleN))
+    story.append(XBox((1.75)*inch, .5 * inch, '1/2x1-3/4"'))
+    c = Canvas('out.pdf')
+    f = Frame(inch, inch, 6*inch, 9*inch, showBoundary=1)
+    f.addFromList(story, c)
+    c.save()
+    print 'saved out.pdf'
+
+def fullTest(fileName="test_full.pdf"):
+    """Creates large-ish test document with a variety of parameters"""
+
+    story = []
+
+    styles = getSampleStyleSheet()
+    styleN = styles['Normal']
+    styleH = styles['Heading1']
+    styleH2 = styles['Heading2']
+    story = []
+
+    story.append(Paragraph('ReportLab Barcode Test Suite - full output', styleH))
+    story.append(Paragraph('Generated on %s' % time.ctime(time.time()), styleN))
+
+    story.append(Paragraph('', styleN))
+    story.append(Paragraph('Repository information for this build:', styleN))
+    #see if we can figure out where it was built, if we're running in source
+    if os.path.split(os.getcwd())[-1] == 'barcode' and os.path.isdir('.svn'):
+        #runnning in a filesystem svn copy
+        infoLines = os.popen('svn info').read()
+        story.append(Preformatted(infoLines, styles["Code"]))
+        
+    story.append(Paragraph('About this document', styleH2))
+    story.append(Paragraph('History and Status', styleH2))
+
+    story.append(Paragraph("""
+        This is the test suite and docoumentation for the ReportLab open source barcode API,
+        being re-released as part of the forthcoming ReportLab 2.0 release.
+        """, styleN))
+
+    story.append(Paragraph("""
+        Several years ago Ty Sarna contributed a barcode module to the ReportLab community.
+        Several of the codes were used by him in hiw work and to the best of our knowledge
+        this was correct.  These were written as flowable objects and were available in PDFs,
+        but not in our graphics framework.  However, we had no knowledge of barcodes ourselves
+        and did not advertise or extend the package.
+        """, styleN))
+
+    story.append(Paragraph("""
+        We "wrapped" the barcodes to be usable within our graphics framework; they are now available
+        as Drawing objects which can be rendered to EPS files or bitmaps.  For the last 2 years this
+        has been available in our Diagra and Report Markup Language products.  However, we did not
+        charge separately and use was on an "as is" basis.
+        """, styleN))
+
+    story.append(Paragraph("""
+        A major licensee of our technology has kindly agreed to part-fund proper productisation
+        of this code on an open source basis in Q1 2006.  This has involved addition of EAN codes
+        as well as a proper testing program.  Henceforth we intend to publicise the code more widely,
+        gather feedback, accept contributions of code and treat it as "supported".  
+        """, styleN))
+
+    story.append(Paragraph("""
+        This involved making available both downloads and testing resources.  This PDF document
+        is the output of the current test suite.  It contains codes you can scan (if you use a nice sharp
+        laser printer!), and will be extended over coming weeks to include usage examples and notes on
+        each barcode and how widely tested they are.  This is being done through documentation strings in
+        the barcode objects themselves so should always be up to date.
+        """, styleN))
+
+    story.append(Paragraph('Usage examples', styleH2))
+    story.append(Paragraph("""
+        To be completed
+        """, styleN))
+
+    story.append(Paragraph('The codes', styleH2))
+    story.append(Paragraph("""
+        Below we show a scannable code from each barcode, with and without human-readable text.
+        These are magnified about 2x from the natural size done by the original author to aid
+        inspection.  This will be expanded to include several test cases per code, and to add
+        explanations of checksums.  Be aware that (a) if you enter numeric codes which are too
+        short they may be prefixed for you (e.g. "123" for an 8-digit code becomes "00000123"),
+        and that the scanned results and readable text will generally include extra checksums
+        at the end.
+        """, styleN))
+
+    codeNames = getCodeNames()
+    from reportlab.lib.utils import flatten
+    width = [float(x[8:]) for x in sys.argv if x.startswith('--width=')]
+    height = [float(x[9:]) for x in sys.argv if x.startswith('--height=')]
+    isoScale = [int(x[11:]) for x in sys.argv if x.startswith('--isoscale=')]
+    options = {}
+    if width: options['width'] = width[0]
+    if height: options['height'] = height[0]
+    if isoScale: options['isoScale'] = isoScale[0]
+    scales = [x[8:].split(',') for x in sys.argv if x.startswith('--scale=')]
+    scales = map(float,scales and flatten(scales) or [1])
+    scales = map(float,scales and flatten(scales) or [1])
+    for scale in scales:
+        story.append(PageBreak())
+        story.append(Paragraph('Scale = %.1f'%scale, styleH2))
+        story.append(Spacer(36, 12))
+        for codeName in codeNames:
+            s = [Paragraph('Code: ' + codeName, styleH2)]
+            for hr in (0,1):
+                s.append(Spacer(36, 12))
+                dr = createBarcodeDrawing(codeName, humanReadable=hr,**options)
+                dr.renderScale = scale
+                s.append(dr)
+                s.append(Spacer(36, 12))
+            s.append(Paragraph('Barcode should say: ' + dr._bc.value, styleN))
+            story.append(KeepTogether(s))
+
+    SimpleDocTemplate(fileName).build(story)
+    print 'created', fileName
+
+if __name__=='__main__':
+    run()
+    fullTest()