In Debian and Ubuntu distros, the python reportlab package provides
multiple binary packages among which python3-reportlab [0] [1] and
python3-renderpm [2] [3]. The latter is only recommended, but is mandatory for
odoo because it's needed for rendering barcode with the `asString` method.

[0] https://packages.debian.org/buster/python3-reportlab
[1] https://packages.ubuntu.com/focal/python3-reportlab
[2] https://packages.debian.org/buster/python3-renderpm
[3] https://packages.ubuntu.com/focal/python3-renderpm

closes odoo/odoo#67410

X-original-commit: 73e9926435f0b3c6eb4fe06457231aa60c8bb557
Signed-off-by: Xavier Dollé (xdo) <xdo@odoo.com>
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Zeep replaced suds but Debian and Rpm packaging were not updated.
Ofxparse is required but did not appear in Debian nor Rpm packaging.

closes odoo/odoo#66784

X-original-commit: 39738f2b3c310bef25d483ced9bcf29f9894abbd
Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

As Fedora 32 was the current release when Odoo 14.0 was released, this
should be the supported version.

Also, a few  old libs were still in mentioned in the packaging files.
They flew under the radar because they never broke the packaging.
This is not the case anymore, those libs disappeared from the Fedora
repos.

It seems that pyparsing is not used anymore since 5a1c06a19 and thus can
be safely removed from `requirements.txt` too.

pychart is not used anymore since 3425752ea.

While at it, remove mix of tabs and spaces in package.dffedora, also add
missing packages to avoid installation at test time.

Now that I started down the slippery slope, also removed some `-dev`
packages in package.dfsrc as wheel's are available.

Finally, the rpm install script now detects the python ABI version in
order to avoid update this file at each ABI change in Fedora.

Fixes #63719

closes odoo/odoo#65224

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Since 5952928b42, the python3-mock debian package is removed from the
Dockerfile used to build the Debian package. This prevent the Odoo
Debian package to be built.

The python3-mock debian package has an inderect dependency on
python3-setuptools which is necessary to build the package.

With this commit, the dependency is explicitely set in the Dockerfile.

closes odoo/odoo#49278

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

Before this commit, a lot of leftover import shims existed in the
codebase for py2-py3 compatibility, these are no longer needed since
Odoo 13.0+ doesn't support Python 2 anymore and is (finally) in EOL.

With this commit, these shims are dropped, making the code cleaner,
easier to read and with one less dependency.

Queue -> queue -> py2-py3 compatibility
xmlrpclib -> xmlrpc.client -> py2-py3 compatibility
ConfigParser -> configparser -> py2-py3 compatibility
itertools.izip_longest -> itertools.zip_longest -> py2-py3 compatibility
urllib -> urllib.request -> py2-py3 compatibility
__builtins__ -> builtins -> py2-py3 compatibility
_winreg -> winreg -> py2-py3 compatibility

mock -> unittest.mock -> merged into CPython

The debian/fedora packages and requirements.txt have been updated accordingly

closes odoo/odoo#44601

Related: odoo/enterprise#8141
Signed-off-by: Xavier Morel (xmo) <xmo@odoo.com>

Python module vatnumber doesn't seem maintained anymore. Therefore, we should:
    - call directly stdnum (which is maintained and mostly used everywhere in vatnumber)

Also improve stdnum import, vat fix method and vat expected formats

task-1915371

closes odoo/odoo#36978

Signed-off-by: Quentin De Paoli (qdp) <qdp@openerp.com>

Actually, docker is used to test Linux packages once they are built.
The packaging process is done on the host system where package.py is
run.

Consequences:
    * difficult to reproduce an exact same build on another host
    * changing a Debian/Ubuntu target version means some upgrade steps
      on the build host (mix that with the fact that the host also
      could build old Odoo versions)
    * Fedora rpm package is built on an Ubuntu system (which is not a
      real problem but it could be)

With this commit, the package.py utility is refactored to use Docker
containers to build the Gnu/Linux packages.

Also, the Debian package is adapted for Debian Buster, the RPM package
is built based on Fedora 30.

Some minor changes are also made in the windows packaging system.

closes odoo/odoo#37766

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

The use of polib as introduced in commit 632fa04.
The nightly packaging system uses Docker to test the packages and they need to
be updated when a new library dependency is introduced.

closes odoo/odoo#34117

Signed-off-by: Christophe Monniez (moc) <moc@odoo.com>

After the Odoo package is built, the package.py script uses a Docker
image to test the package. After that python3-qrcode was added as a
dependency for the package in 2ff49c5f , it revealed some issues.

A missing cli parameter and a forgotten '&&' in the Dockerfile prevented
the installation of the depending packages.

Also, the script shebang was wrong by launching python2.

Finally, the fact that python3-xlwt is missing in Debian stretch was
highlighted. With this commit, the python3-xlwt is explicitly removed
from the dependencies and the documentation is updated accordingly.

closes odoo/odoo#28807

Commit cf853a785ba4b533ddb2e8a717c9ffa6429e7b81 removed all yml tests
and the yml import engine from Odoo forever, however PyYAML remains a
dependency even though it's not used anymore.

This commit removes any reference to this lib that could be found.

closes odoo/odoo#27563