Odoo/addons/hw_drivers/drivers/DisplayDriver.py, branch 14.0

[IMP] hw_drivers: Easier detection of new devices

2020-05-13T13:26:05+00:00

Until now, to detect new types of devices on the IoT Box, we had to
modify driver.py. If partners wanted to connect a new type of device,
they had to modify directly the files on the Box, meaning that after
each new build they had to re-apply all their modifications.

We remove the loops that detected the connected devices and replace
them by `Interfaces`. All interfaces will be loaded from the connected
Odoo instance with the corresponding drivers.

TaskID: 2082282

[FIX] hw_drievrs: Replace SSID on the first boot

2020-02-25T14:08:49+00:00

We replace the SSID of the IoTBox with a unique SSID

closes odoo/odoo#46255

X-original-commit: c847c1cb149e386331ff2e5b19a58862e1b66714
Signed-off-by: Quentin Lejeune (qle)

[IMP] hw_drivers: Dual customer display

2019-11-27T14:15:18+00:00

Customer displays were all using the same URL and therefore could only
show the same products. We now use different URLs per screen.

Two screens connected to the same IoT Box can now display customer
displays from different POS.

closes odoo/odoo#41026

Taskid: 2123511
X-original-commit: 12569b0e7f7a9e447f8df908597131911c5cfef8
Signed-off-by: Antoine Prieëls

[IMP] iot: Dual screen support for RPI4

2019-11-27T14:15:18+00:00

We now support the RPI4 which has 2 micro-HDMI outputs, while the
prvious driver only supported one display. We add support for a second
display.

Taskid: 2123511
X-original-commit: 5886c3a864c990fcd7b852baafab752e7da90494

[IMP] point_of_sale: Add support of RPI 4

2019-11-14T15:59:36+00:00

With this PR we can use the IoT Box with the new Raspberry Pi 4 B
using raspbian 'Buster'

With buster we remove the kiosk mode of firefox and
replace this mode with a fullscreen view of firefox.
To do that we adapt DisplayDriver to expend window with a 'call_xdotool(F11)'

We remove postgresql and patch 'odoo/odoo/http.py' for he does not return a DB.

Task id: 2089286

closes odoo/odoo#40292

X-original-commit: d20676b69f37905c7994b3c55cb1bb6dfda3460e
Signed-off-by: pimodoo

[FIX] iot: DisplayDriver load_url error

2019-10-11T22:36:16+00:00

We didn't check the status of the response of the server when getting
the url of the display. If the status was different from 200, we tried
to use the error response as URL.

closes odoo/odoo#38554

X-original-commit: 8854f910f5ac7ab5d2dfd0f51f3249a068d40885
Signed-off-by: Quentin Lejeune (qle)

[FIX] hw_drivers: Fix for Customer display

2019-10-10T06:26:38+00:00

When a box was unable to reach the Odoo server the customer display
show a white screen.

With this fix we show the default POS Client display with IP address

closes odoo/odoo#38315

X-original-commit: 290c2be72cd8305fbf8093d782604e8b0f4a80c4
Signed-off-by: Quentin Lejeune (qle)

[FIX] hw_drivers: Display slowed IoT Box down

2019-09-11T08:38:36+00:00

In DisplayDriver, we setup a loop to refresh the display every minute
if the url shown is not the customer display. If the customer display
was used, the loop didn't wait a minute and looped indefinitely,
without sleeping. This slowed down the whole box and explains why
receipts took a long time to print with older versions of Odoo and why
the framerate of the curomer display was so low.

closes odoo/odoo#36670

Signed-off-by: Quentin Lejeune (qle)

[IMP] point_of_sale: Per device screen_url

2019-09-04T13:08:12+00:00

The screen URL is not linked to the Box anymore but to the Device.
We don't need to fetch a screen_url at the boot, it'll be done inside
each device.

TaskID: 1893493

[REF] hw_{drivers,screen}: Convert hw_screen into an IoT Driver

2019-09-04T13:08:10+00:00

Move all the logic that was inside hw_screen into an IoT Driver
in order to have consistency between devices.

TaskID: 1933834